The TP-Link TL-POE160S is a Gigabit PoE+ injector for adding power to an Ethernet connection where a powered device is needed away from a mains socket. It suits home and small office network users installing a compatible access point, IP camera or IP phone.

Connect your network to the injector’s data input, then run one Ethernet cable from its power and data output to the powered device. The injector carries data and power together, helping simplify installation where a separate power connection is inconvenient. It supports IEEE 802.3af and 802.3at devices and supplies up to 30 W, automatically determining the power required by the connected device. Both RJ45 ports support Gigabit Ethernet, and the plug-and-play design requires no configuration. Its integrated power supply and desktop or wall-mounting options give you flexibility when positioning it.

Key features

• Combines Ethernet data and power on one cable to the powered device.
• Supports IEEE 802.3af and 802.3at PoE standards.
• Provides up to 30 W of power for compatible devices.
• Automatically determines the connected device’s power requirements.
• Two Gigabit RJ45 ports support data speeds up to 1000 Mbps.
• Plug-and-play operation avoids configuration steps.
• Can be installed on a desktop or mounted on a wall.

Compatibility

Use with an IEEE 802.3af or 802.3at PoE powered device or compatible PoE receiver adapter, and check that its power requirement does not exceed 30 W. The injector has one RJ45 data-in port and one RJ45 power-and-data-out port, plus an AC power socket. Good to know: the connected device must support PoE, and a suitable Ethernet cable is required to link the injector to your network and powered device.

In the box

• TP-Link TL-POE160S
• Power cord
• RJ45 cable
• Installation guide
• Wall-mounting kits

Specifications

For a compatible Gigabit PoE device, the TL-POE160S offers a straightforward way to provide both network connectivity and power over Ethernet, with flexible desktop or wall installation.